TERMS AND CONDITIONS

Website Usage

  1. Introduction

These Website Standard Terms and Conditions written on this webpage shall manage your use of this website. These Terms will be applied fully and affect to your use of this Website. By using this Website, you agreed to accept all terms and conditions written in here. You must not use this Website if you disagree with any of these Website Standard Terms and Conditions.

Minors or people below 18 years old are not allowed to use this Website.

  1. Intellectual Property Rights

Other than the content you own, under these Terms, The Big Display Company and/or its licensors own all the intellectual property rights and materials contained in this Website.

You are granted limited license only for purposes of viewing the material contained on this Website.

  1. Restrictions

You are specifically restricted from all of the following

  • publishing any Website material in any other media;
  • selling, sublicensing and/or otherwise commercializing any Website material;
  • publicly performing and/or showing any Website material;
  • using this Website in any way that is or may be damaging to this Website;
  • using this Website in any way that impacts user access to this Website;
  • using this Website contrary to applicable laws and regulations, or in any way may cause harm to the Website, or to any person or business entity;
  • engaging in any data mining, data harvesting, data extracting or any other similar activity in relation to this Website;
  • using this Website to engage in any advertising or marketing.

Certain areas of this Website are restricted from being access by you and The Big Display Company may further restrict access by you to any areas of this Website, at any time, in absolute discretion. Any user ID and password you may have for this Website are confidential and you must maintain confidentiality as well.

  1. Your Content

In these Website Standard Terms and Conditions, “Your Content” shall mean any audio, video text, images or other material you choose to display on this Website. By displaying Your Content, you grant The Big Display Company a non-exclusive, worldwide irrevocable, sub licensable license to use, reproduce, adapt, publish, translate and distribute it in any and all media.

Your Content must be your own and must not be invading any third-party’s rights. The Big Display Company reserves the right to remove any of Your Content from this Website at any time without notice.

  1. No warranties

This Website is provided “as is,” with all faults, and The Big Display Company express no representations or warranties, of any kind related to this Website or the materials contained on this Website. Also, nothing contained on this Website shall be interpreted as advising you.

  1. Limitation of liability

In no event shall The Big Display Company, nor any of its officers, directors and employees, shall be held liable for anything arising out of or in any way connected with your use of this Website whether such liability is under contract.  The Big Display Company, including its officers, directors and employees shall not be held liable for any indirect, consequential or special liability arising out of or in any way related to your use of this Website.

  1. Indemnification

You hereby indemnify to the fullest extent The Big Display Company from and against any and/or all liabilities, costs, demands, causes of action, damages and expenses arising in any way related to your breach of any of the provisions of these Terms.

  1. Severability

If any provision of these Terms is found to be invalid under any applicable law, such provisions shall be deleted without affecting the remaining provisions herein.

  1. Variation of Terms

The Big Display Company is permitted to revise these Terms at any time as it sees fit, and by using this Website you are expected to review these Terms on a regular basis.

  1. Assignment

The The Big Display Company is allowed to assign, transfer, and subcontract its rights and/or obligations under these Terms without any notification. However, you are not allowed to assign, transfer, or subcontract any of your rights and/or obligations under these Terms.

  1. Entire Agreement

These Terms constitute the entire agreement between The Big Display Company and you in relation to your use of this Website, and supersede all prior agreements and understandings.

  1. Governing Law & Jurisdiction

These Terms will be governed by and interpreted in accordance with the laws of the State of United Kingdom (UK), and you submit to the non-exclusive jurisdiction of the state and federal courts located in United Kingdom (UK) for the resolution of any disputes.

Online / Offline Purchases

1. Definitions

  1. “Seller” means the party providing the goods or services under these terms and conditions.
  2. “Buyer” means the party contracting with the Seller to acquire the good and services supplied under these terms and conditions.
  3. “Work” means all goods (by way of intermediate or finished product) and services supplied by the Seller to the Buyer.
  4. “Intermediates” means all products produced during the manufacturing process including non-exhaustively discs, film, plate, intellectual property.
  5. “Preliminary Work” means all work done in the concept and preparatory stages (including non-exhaustively design, artwork, colour matching).
  6. “Electronic File” means any text, illustration or other matter supplied or produced by either Party in digitised form on disc, through a modem, or by ISDN or any other communication link.
  7. “Periodical Publications” means publications produced at (normally regular) intervals.
  8. “Insolvency” means the Buyer is in a position where it is unable to pay its debts or has a winding up petition issued against it or has a receiver, administrator or administrative receiver appointed to it or being a person commits an act of bankruptcy or has a bankruptcy petition issued against him.

2. Payment

  1. Estimates are based on the Seller’s current costs of production and, unless otherwise agreed in writing, are subject to amendment to meet any rise or fall in such costs that have taken place by the time of delivery.
  2. Estimates are given exclusive of tax and the Seller reserves the right to charge and the Buyer will pay any VAT or other tax payable.
  3. All work carried out shall be charged. This includes all Preliminary Work, including agreed artwork charges whether or not the Buyer agrees to that work being taken forward to production.
  4. Any additional work required of the Seller by reason of the Buyer supplying inadequate copy, incomplete or incorrect instructions or insufficient materials; or late delivery of the same shall be charged.
  5. Payment shall become due before delivery of the Work. The Seller, at his absolute discretion, may ask for part or full payment in advance of starting the Work.
  6. If Credit Facilities have been granted, payment is due by the end of the month following the month of Invoice, unless otherwise agreed. If any item(s) remain unpaid by that due date charges will apply, in accordance with s5A and/or s6 of the Late Payment Commercial Debt (Interest) Act 1998 or any subsequent enactment. In addition, all invoices will become due and payable immediately and will be treated as overdue items, with appropriate charges applied and all costs reasonably incurred in collecting the debt payable by the Buyer.
  7. Unless otherwise agreed in writing, the price of the Work will be “ex-works” and delivery shall be charged extra.
  8. Should the Work be suspended or delayed by the Buyer for any reason the Seller shall be entitled to charge for storage and for loss of or wastage of resources that cannot otherwise be used.
  9. Should the suspension or delay in 2(h) above extend beyond 30 days the Seller shall be entitled to immediate payment for work already carried out, materials specially ordered and any other additional costs.

3. Credit Facilities

  1. Credit facilities may be granted to applicants who complete the Seller’s Credit Account Application Form and who satisfy the Seller’s criteria as set out from time to time. Where facilities are granted the Seller reserves the right to withdraw them at any time, without having to give their reasons and, in such a case, all outstanding invoices become due and payable immediately.
  2. The first 3 orders must be paid for before the Seller will open a credit facility. The sum of these orders must be at least £1,000 including VAT, all within a maximum timeframe of 3 months.
  3. To maintain a credit facility the Seller require a minimum annual spend of £3,000 including VAT­­.
  4. These terms are at the discretion of the management of the Seller.

4. Delivery

  1. Delivery of the Work shall be accepted when tendered.
  2. Unless otherwise agreed in writing completion and delivery times are a guide only and, whilst the Seller will make every effort to adhere to proposed timescales, time is not of the essence in any contract with the Buyer.
  3. Unless otherwise agreed in writing, (in which case an extra charge may be made) delivery will be to kerbside at the Buyer’s address and the Buyer will make arrangements for off-loading and for any additional transportation to its storage facility.
  4. Subject to any agreement as per 4(c) above, delivery involving difficult access and/or unreasonable distance from vehicular access shall entitle the Seller to make an extra charge to reflect its extra costs.
  5. Should expedited delivery be agreed, the Seller shall be entitled to make an extra charge to cover any overtime or any other additional costs.

5. Materials supplied or specified by the Buyer

5.1 Electronic Files

  1. It is the Buyer’s responsibility to maintain a copy of any original Electronic File provided by the Buyer.
  2. The Seller shall not be responsible for checking the accuracy of supplied input from an electronic file unless otherwise agreed in writing. This includes any copy, images, alignment and any other components that make up the artwork. Please see our artwork guide for the correct method to set up artwork.
  3. Without prejudice to clause 5.2(b), if an electronic file is not suitable for outputting on equipment normally adequate for such purposes without adjustment or other corrective action the Seller may make a charge for any resulting additional cost incurred or may reject the file without prejudice to his rights to payment for work done/material purchased.

5.2 Other Materials

  1. The Seller may reject any materials supplied or specified by the Buyer which appear to him to be unsuitable for the purpose intended. Additional cost incurred if materials are found to be unsuitable during production may be charged except that if the whole or any part of such additional cost could have been avoided but for unreasonable delay by the Seller in ascertaining the unsuitability of the materials then that amount shall not be charged to the Buyer.
  2. Without prejudice to clause 5.3, where materials are so supplied or specified, and the Seller so advises the Buyer, and the Buyer instructs the Seller in writing to proceed anyway, the Seller will use reasonable endeavours to secure the best results, but shall have no liability for the quality of the end-product(s).
  3. Quantities of materials supplied shall be adequate to cover normal spoilage. Any costs incurred as a result of shortages, including re-starting jobs, duplicating masters etc will be charged in addition to the estimated price.

5.3 Risk and storage

  1. Buyer’s property and all property supplied to the Seller by or on behalf of the Buyer shall while it is in the possession of the Seller or in transit to or from the Buyer be deemed to be at Buyer’s risk unless otherwise agreed in writing and the Buyer should insure accordingly.
  2. The Seller shall be entitled to make a reasonable charge for the storage of any Buyer’s property left with the Seller before receipt of the order or after notification to the Buyer of completion of the work.

5.4 Finished Goods

  1. The risk in the Work and all goods delivered in connection with the Work shall pass to the Buyer on delivery and the Buyer should insure accordingly.
  2. On completion of the Work, the Seller will store the Buyer’s materials and Work for a maximum of one month, after which time they will be destroyed without further notice.

6. Materials and equipment supplied by the Seller

  1. Metal, film and other materials owned by the Seller and used in the production of intermediates, type, plates, film-setting, negatives, positives, electronic files and other production processes, together with items thereby produced, shall remain the Seller’s exclusive property.
  2. Type shall be distributed and film and plates, tapes, discs, electronic files or other work destroyed immediately after the order is executed unless written arrangements are made to the contrary. In the latter event, storage shall be charged.
  3. The Seller shall not be obliged to download any digital data from his equipment or supply the same to the Buyer on disc, tape or by any communication link.

7. Retention of Title

  1. The Work remains the Seller’s property until the Buyer has paid for it and discharged all other debts owing to the Seller.
  2. If the Buyer becomes subject to Insolvency and the Work has not been paid for in full the Seller may take the goods back and, if necessary, enter the Buyer’s premises to do so, or to inspect and/or label the goods so as to identify them clearly.
  3. If the Buyer shall sell the goods before they have been paid for in full he shall hold the proceeds of sale on trust for the Seller in a separate account until any sum owing to the Seller has been discharged from such proceeds.
  4. Where the Buyer is in breach of these Terms or performs any act of Bankruptcy or Insolvency the Seller reserves the right to approach the Buyer’s customer and to offer the Work directly to them, notwithstanding the fact that this will involve advising the Buyer’s customer that the Buyer is in breach or in default.

8. Proofs and variations

  1. The Seller shall incur no liability for any errors not corrected by the Buyer where the Buyer has been provided with proofs. The Buyer’s alterations and additional proofs necessitated thereby shall be charged extra. When style, type or layout is left to the Seller’s judgement, changes therefrom made by the Buyer shall be charged extra.
  2. Where the Buyer specifically waives any requirement to examine proofs the Seller is indemnified by the Buyer against any and all errors in the finished Work.
  3. Colour proofs: Due to differences in equipment, material, inks and other conditions between colour proofing and production runs, a reasonable variation in colour between colour proofs and the completed job will be deemed acceptable unless otherwise agreed in writing.
  4. Variations in quantity Every endeavour will be made to deliver the correct quantity ordered, but estimates are conditional upon margins of 5 per cent for work being allowed for overs or unders the same to be charged or deducted, unless otherwise agreed in writing.
  5. Product Quality Each product has its own specific usage, print quality and viewing distance. For example PVC is sold with a viewing distance of over 1 metre and Mesh PVC has a viewing distance of over 3 metres. You will need to contact a member of the sales team for more specific information on each product.
  6. Product Sizes Due to the production methods involved with large format printing (including but not limited to heat curing of ink, natural stretch in materials and hand finishing) we work within a tolerance of 3% of the finished size of our products. We will not accept any liability for any products which fall within this tolerance where the Buyer is unable to use the product because it is unavoidable with the production methods used by the Seller.
  7. Hardware Variations Due to global supply chain issues relating to both COVID-19 and Brexit, there may be instances where an alternative hardware or material is used.

9. Claims and Liability

9.1 Claims

  1. Advice of damage, delay or loss of goods in transit or of non-delivery must be given in writing to the Seller and the carrier within 1 working day of delivery (or, in the case of non-delivery, within 1 working day of notification of despatch of the goods) and any claim in respect thereof must be made in writing to the Seller and the carrier within 1 working day of delivery (or, in the case of non-delivery, within 1 working day of notification of despatch). All other claims must be made in writing to the Seller within 1 working day of delivery. The Seller shall not be liable in respect of any claim unless the aforementioned requirements have been complied with except in any particular case where the Buyer proves that (i) it was not possible to comply with the requirements and (ii) the claim was made as soon as reasonably possible.
  2. If the Work is defective so that the Buyer may in law reject it, said rejection must take place within 1 working day of delivery of the goods, failing which the Buyer will be deemed to have accepted the Work.
  3. The Seller will not be responsible for the cost of reprints or carriage incurred for goods visibly damaged in transit (broken packaging etc), where the Buyer or third party recipient has not signed for the goods as damaged at the time of delivery.
  4. In the event of all or any claims or rejections the Seller reserves the right to inspect the Work within 3 working days of the claim or rejection being notified.
  5. All claims will be void if the product has been used (i.e. exhibition materials have been used at an event, signage has been drilled into a wall, outdoor graphics left outside).

9.2 Liability

  1. Insofar as is permitted by law where Work is defective for any reason, including negligence, the Seller’s liability (if any) shall be limited to rectifying such defect, or crediting its value against any invoice raised in respect of the Work.
  2. Where the Seller performs its obligations to rectify defective Work under this condition the Seller shall not be liable for indirect loss, consequential loss or third party claims occasioned by defective Work and the Buyer shall not be entitled to any further claim in respect of the Work nor shall the Buyer be entitled to repudiate the contract, refuse to pay for the work or cancel further deliveries.
  3. Defective Work must be returned to the Seller before replacement or credits can be issued. If the subject Work is not available to the Seller the Seller will hold that the Buyer has accepted the Work and no credits or replacement Work will be provided.
  4. The Seller shall not be liable for indirect loss, consequential loss or third party claims occasioned by delay in completing the work or for any loss to the Buyer arising from delay in transit, whether as a result of the Seller’s negligence or otherwise.
  5. Where the Seller offers to replace defective Work the Buyer must accept such an offer unless he can show clear cause for refusing so to do. If the Buyer opts to have the work re-done by any third party without reference to the Seller the Buyer automatically revokes his right to any remedy from the Seller, including but not exclusively the right to a credit in respect of Work done by the Seller.
  6. Where the Work will be forwarded by or on behalf of the Buyer to a third party for further processing the Buyer will be deemed to have inspected and approved the Work prior to forwarding and the Seller accepts no liability for claims arising subsequent to the third party’s processing.
  7. The Seller reserves the right to reject any work forwarded to him after initial processing by a third party as soon as is reasonably practicable without processing the work any further. Should the Buyer require the Seller notwithstanding to continue, then the Seller is only obliged to do so after confirmation from the Buyer in writing.
  8. Nothing in these conditions shall exclude the Seller’s liability for death or personal injury as a result of its negligence.

10. Insolvency

Without prejudice to other remedies, if the Buyer becomes insolvent, the Seller shall have the right not to proceed further with the contract or any other work for the Buyer and be entitled to charge for work already carried out (whether completed or not) and materials purchased for the Buyer, such charge to be an immediate debt due to him. Any unpaid invoices shall become immediately due for payment.

11. General Lien

Without prejudice to other remedies, in respect of all unpaid debts due from the Buyer the Seller shall have a general lien on all goods and property of or provided by the Buyer in his possession (whether worked on or not) and shall be entitled on the expiration of 14 days’ notice to dispose of such goods or property as agent for the Buyer in such manner and at such price as he thinks fit and to apply the proceeds towards such debts, and shall when accounting to the Buyer for any balance remaining be discharged from all liability in respect of such goods or property.

12. Illegal matter

  1. The Seller shall not be required to print any matter which in his opinion is or may be of an illegal or libellous nature or an infringement of the proprietary or other rights of any third party.
  2. The Seller shall be indemnified by the Buyer in respect of any claims, costs and expenses arising out of the printing by the Seller for the Buyer of any illegal or unlawful matter including matter which is libellous or infringes copyright, patent, design or any other proprietary or personal rights. The indemnity shall include (without limitation) any amounts paid on a lawyer’s advice in settlement of any claim that any matter is libellous or such an infringement.

13. Force majeure

The Seller shall be under no liability if he shall be unable to carry out any provision of the contract for any reason beyond his reasonable control including (without limiting the foregoing): Act of God; legislation; war; fire; flood; drought; inadequacy or unsuitability of any instructions, electronic file or other data or materials supplied by the Buyer; failure of power supply; lock-out, strike or other action taken by employees in contemplation or furtherance of a dispute; or owing to any inability to procure materials required for the performance of the contract. During the continuance of such a contingency the Buyer may by written notice to the Seller elect to terminate the contract and pay for work done and materials used, but subject thereto shall otherwise accept delivery when available.

14. Data Protection

The Buyer is hereby notified that the Seller may transfer personal information about the Buyer to a Credit Agency pursuant to clauses above.

15. Law

These conditions and all other express and implied terms of the contract shall be governed and construed in accordance with the laws of England and the parties agree to submit to the jurisdiction of the courts of England and Wales.

16. Notices

All specifications and notices relied on by either party and all variations to this agreement must be in writing and include a duly authorised signature.

17. Consumers

Nothing in these Terms shall affect the rights of Consumers.

18. Severability

All clauses and sub-clauses of this Agreement are severable and if any clause or identifiable part thereof is held to be unenforceable by any court of competent jurisdiction then such enforceability shall not affect the enforceability of the remaining provisions or identifiable parts thereof in these Terms and Conditions.

SILICON EDGE GRAPHIC FRAMES

  • Lead times: 2-3 working days to cut silicone edge graphic frames, and 3-5 working days to print and sew the graphics. This work is completed concurrently, so the maximum combined lead time, depending on order value, should be 5 working days for the entire job (ie graphic and frame). Faster lead times may be possible subject to availability and there may be additional charges incurred.
  • Proforma customers: All frames are cut on receipt of payment, within our standard lead times. Delays with payment can therefore cause a delay in the completion of the job.
  • Credit Account customers: We will cut the frame as soon as we receive the PO.
  • Cancellations: Each frame is custom cut and the offcuts are not used for other jobs. If the customer cancels after issuing the PO / after it is paid they will have to pay the full value of the frame.
  • Size Adjustments: If the size of the frame goes down after PO / payment the customer will still have to pay the full price plus any additional charges for carriage / cutting. If the frame increases we can supply the extra pieces with a connector. There will be additional charges for the extra material, connectors, feet and braces required, as well as additional carriage charges.
  • Additional Cutting: If the customer decides after purchasing that they need the frame to be cut down for transportation this will incur additional charges for connectors, feet and braces.

Any extra charges are all on quotation

PRIVACY POLICY

  1. Policy statement

The Big Display Company is a trading name of Bullseye Awards and Garments Ltd. Bullseye Awards and Garments Ltd are incorporated in England providing Printing Services and we are committed to protecting any data that we collect concerning you. By using our services you agree to the use of the data that we collect in accordance with this Privacy Policy.

  1. We are committed to protecting your privacy.

This Policy indicates the type of processes that may result in data being collected about you. Your use of this website gives us the right to collect that information.

  1. IP address lookup

Our company uses third parties to provide information about visitors to our websites. When you visit our websites we will record your IP address. This address will be matched against public and proprietary IP address databases to provide us with information about your visit. This information may identify the organisation to whom the IP address is registered but not individuals. In some limited cases i.e. single person companies, it may be possible to identify personal data from publicly available ICANN data.

  1. Website cookies and link tracking

Cookies allow us to provide important site functionality so you don’t have to re-enter lots of information. They also allow us to remember what links and pages have been clicked or viewed during a session. If you have provided us with personal data, completing a contact form for example, we may associate this personal data with other information. This will allow us to identify and record what is most relevant to you.

By using your browser controls, you are always in control of the cookies we store and access on your computer. More information on how to control cookies and limit personal data processing can be found at www.youronlinechoices.com/uk/five-top-tips.

  1. Types of communications

By submitting your email address you are consenting to receive the particular piece of information you requested, as well as allowing us to send you appropriate and useful communications. This includes, but is not limited to; invitations to our events, our latest assets (whitepapers, guides, reports, infographics, videos and case studies) and promotional offers on products and services.

If you are a customer of The Big Display Company, you may also receive regular product and company updates.

Where possible you can update your preferences by clicking the link in any emails you receive from us. You can also stop receiving emails from us using that same link or an unsubscribe link, one of either link will always be at the bottom of the email. If you don’t have an email from us to hand and want to update your preferences, fill in the form below. We will send you an email for you to change your preferences as you wish.

  1. Information Collected

We may collect any or all of the information that you give us depending on the type of transaction you enter into, including your name, address, telephone number and email address, together with data about your use of the website. Other information that may be needed from time to time to process a request may also be collected as indicated on the website.

  1. Information Use

We use the information collected primarily to process the task for which you visited the website. Data collected in the UK is held in accordance with the Data Protection Act. All reasonable precautions are taken to prevent unauthorised access to this information. This safeguard may require you to provide additional forms of identity should you wish to obtain information about your account details.

  1. Cookies

Your Internet browser has the in-built facility for storing small files – “Cookies” – that hold information which allows a website to recognise you as a user. Our website takes advantage of this facility to enhance your experience. We use a number of these cookies for analytical purposes, and these are described in detail below. By using The Big Display Company website, you consent to the use of cookies for these purposes.

We use a combination of both session and persistent cookies. Session cookies keep track of your current visit and how you navigate the site, persistent cookies enable our website to recognise you as a repeat visitor when you return. The session cookies will be deleted from your computer when you close your browser. Persistent cookies will be removed on a predetermined expiry date, or when deleted by you.

Most web browsers allow user privacy settings to block either all cookies, or third party cookies. Blocking cookies will, however, have a negative impact upon the usability of many websites, including this one. Please visit www.aboutcookies.org for comprehensive information on how to change your cookie settings in a wide variety of different web browsers.

  1. Google Analytics Cookies

Google Analytics is a website monitoring tool that allows users to see volumes of website visitors, their source, and to analyse how the content of their website is viewed and navigated. This in turn allows optimisation of the content and pages on www.thebigdisplaycompany.co.uk and the marketing programs that drive traffic to the website. Google Analytics does not store any personal information about website visitors, but does use persistent cookies to identify repeat visitors. You may universally opt-out of all Google Analytics tracking used by all websites by visiting the following url – https://tools.google.com/dlpage/gaoptout

  1. GatorLeads Cookies

GatorLeads is a tool that identifies the business or organisation that website visitors belong to, based on a reverse IP Lookup. GatorLeads also use cookies to process this identification, and personal information about individual users is stored. Cookies used by GatorLeads store information about your current web browsing session (pages viewed, time on site etc) and the dates and times of previous website visits.

This information is used by The Big Display Company to profile website visitors, in order to better understand the way in which our website content is viewed by different segments.

  1. Email Marketing Post-Click Tracking Cookies

These cookies are used to report on the pages of www.thebigdisplaycompany.co.uk that have been viewed by visitors to the site who have followed links from our email marketing campaigns. This analysis helps us to understand additional content that is viewed by the contacts in our database and therefore allows us to improve and tailor future campaigns to those contact’s specific areas of interest.

You can view our cookie policy in the policy below.

  1. Disclosing Information

We do not disclose any personal information obtained about you from this website to third parties except when we need to do so in order to complete the transaction – e.g. when arranging for a courier company to deliver goods that you have ordered. We may also use the information to keep in contact with you and inform you of developments associated with our business. You will be given the opportunity to remove yourself from any mailing list or similar device. If at any time in the future we should wish to disclose information collected on this website to any third party, it would only be with your knowledge and consent.

We may from time to time provide information of a general nature to third parties – for example, the number of individuals visiting our website or completing a registration form, but we will not use any information that could identify those individuals.

  1. Changes to this Policy

Any changes to our Privacy Policy will be placed here and will supersede this version of our Policy. We will take reasonable steps to draw your attention to any changes in our Policy. However, to be on the safe side, we suggest that you read this document each time you use the website to ensure that it still meets with your approval.

  1. Contacting Us

If you have any questions about our Privacy Policy, or if you want to know what information we have collected about you, please email us at sales@thebigdisplaycompany.co.uk. You can also correct any factual errors in that information or require us to remove your details form any list under our control.

COOKIE POLICY

Cookie Policy statement

Cookies are small text files that are placed on to your computer by websites that you visit. They are used to make websites work, to improve efficiency of websites, to improve the user’s experience and to provide usage information on websites. This information should make your website visits more productive by storing and using information on your website preferences and habits.

Your web browser can choose whether or not to accept cookies. Most web browser software is initially set up to accept them.

We may offer cookies to you and you should ensure that your web browser is set up to not accept cookies if you do not wish to receive them. Please note that if you disable cookies, some services or website functionality may not be available. For further information about cookies and how to disable them please go to aboutcookies.org.

We use the following cookies:

  • Essential cookies. These are cookies that are required for the operation of our website. They include, for example, cookies that enable you to log into secure areas of our website, and to use online forms.
  • Analytical cookies. They allow us to recognise and count the number of visitors and to see how visitors move around our website when they are using it. This helps us to improve the way our website works, for example, by ensuring that users are finding what they are looking for easily.
  • Marketing cookies. These are used to recognise you when you return to our website. This enables us to personalise our content for you, greet you by name and remember your preferences. These cookies also record your visit to our website, the pages you have visited and the links you have followed. We will use this information to make our website, the advertising displayed on it and communications sent more relevant to your interests.

By continuing to use this site, you are accepting our use of these cookies that make advertising and communications more relevant to you and your interests, and further help us to improve the site.

External (3rd Party) Cookies

Full Tag (Cookie) Name Lifespan
E.g Session or Persistent
Full Description Essential, Analytics or Marketing Intrusiveness/ Justification
wow.session Session IIS Session Code Essential ZERO // Standard session cookie served by the web server
wow.anonymousid 2 year Anonymous Visitor ID Analytics LOW // Does not store user data, only stores active menu node over post-back
wow.schedule Session Load Balance Session Queue Essential ZERO // Standard session cookie served by the web server
wow.utmvalues Session Stores the UTM values for the session Analytics LOW // Does not store user data, only stores active menu node over post-back
wow.trackingdata Session Communigator encrypted identifier for the session Marketing MEDIUM // 1st party cookie which is only used by GatorMail integration so GatorLeads (previously known as WOW Analytics) knows email contacts visiting website
wow.data 2 years Encrypted GatorMail identification Analytics MEDIUM //

1st party cookie which is only used by GatorMail integration so GatorLeads (previously known as WOW Analytics) knows email contacts visiting website

ASPXAUTH Session CommuniGator Product Authentication Essential ZERO // Authentication cookie served by the Communigator product
ASP.NET_SessionId Session IIS Session cookie Essential ZERO //

Standard session cookie served by the web server

Google Analytics _utma

_utmb

_utmc

_utmz

Google Analytics cookies do not collect personal data about our website visitors.

The data collected by Google Analytics is used to analyse how frequently the same people revisit the University website, how the website is found (from advertising or referring websites), and which pages are most frequently viewed. This information is combined with data from thousands of other users to create an overall picture of website use, and is never identified individually or personally and is not linked to any other information we store about you.

Google’s privacy policy

Opt out of Google Analytics

Analytics LOW //

3rd party cookie which does not personal store user data

 

Google Maps SID, SAPISID, APISID, SSID, HSID, NID, PREF Various unique identifiers, except for PREF which stores your options such as preferred zoom level. Google set a number of cookies on any page that includes a Google Map. While we have no control over the cookies set by Google, they appear to include a mixture of pieces of information to measure the number and behaviour of Google Maps users.
Google’s privacy policyOpt out of Google Analytics
Analytics Low
_ga 2 years This cookies is used to distinguish unique users by assigning a randomly generated number as a client identifier Analytics LOW //

3rd party cookie which does not personal store user data

_gid Session Stores and updates a unique value for each page visited Analytics LOW //

3rd party cookie which does not personally store user data

_gat Session This cookies is used to throttle the request rate – limiting the collection of data on high traffic sites Analytics LOW //

3rd party cookie which does not personally store user data

0